分页: 1 / 1

马达加速不流畅什么原因?

帖子发表于 : 01 7月 2014 22:45
Snookerca
请教行家,方向盘马达必须将油门推到最底速度才突然起来,做不到均匀加速,什么原因?

Re: 马达加速不流畅什么原因?

帖子发表于 : 01 7月 2014 22:54
Snookerca
不知道是控制cable问题还是carb.

Re: 马达加速不流畅什么原因?

帖子发表于 : 02 7月 2014 15:32
Allen
You may check the following items while pushing forward the gas handle (the engine is off):
1. if the throttle plate opening changes accordingly to the handle position
2. if the accelerator pump inside the carb ejects gas into throat

Re: 马达加速不流畅什么原因?

帖子发表于 : 02 7月 2014 20:42
Snookerca
多谢Allen 按你说的检查了 推控制杆时可以听到油注入的声音 但看不风门叶 我的马达是86 Johnson 30hp

Re: 马达加速不流畅什么原因?

帖子发表于 : 02 7月 2014 20:47
Snookerca
再次检查 看到风门叶可以打开 但在中程似乎打开不大 要到底才全打开 是这个原因吗? 如何调节?

Re: 马达加速不流畅什么原因?

帖子发表于 : 03 7月 2014 00:12
Allen
抱歉上班时间打不了中文。这要看owner'a manual,是不是调节cable松紧的螺丝松动了?

Re: 马达加速不流畅什么原因?

帖子发表于 : 03 7月 2014 09:39
Snookerca
Thanks a lot. I will google it.

Re: 马达加速不流畅什么原因?

帖子发表于 : 03 7月 2014 16:46
Ecstasy
could be carbon build up issue, check spark plugs...and put a bottle of seafoam into the gas to clean the carbon inside the engine.

Re: 马达加速不流畅什么原因?

帖子发表于 : 03 7月 2014 22:21
Snookerca
我用手触碰carb上面的弹簧 风门叶可以开到90度完全打开,但用油门就只能开到60度左右 而且在油门中程风门几乎没有变化,只在使劲推到最底时能开到60度 当然此时速度最快 或许这也正常?

Re: 马达加速不流畅什么原因?

帖子发表于 : 04 7月 2014 17:12
Allen
carb最上面的叶片应该是choke,在马达运行中应该全开。下面才是throttle油门叶片,开度和油门推竿位置对应,请仔细检查一下,发个不同油门位置的照片更好

Re: 马达加速不流畅什么原因?

帖子发表于 : 04 7月 2014 17:16
Allen
Snookerca 写道:我用手触碰carb上面的弹簧 风门叶可以开到90度完全打开,但用油门就只能开到60度左右 而且在油门中程风门几乎没有变化,只在使劲推到最底时能开到60度 当然此时速度最快 或许这也正常?


看起来是cable松了,调整一下,不行的话该换cable了

Re: 马达加速不流畅什么原因?

帖子发表于 : 04 7月 2014 21:21
Snookerca
多谢Allen 我再研究研究