电马达kill switch

[Fishingdaddy]

这几天深挖安全相关的贴，看了站友3次落水的经历，庆幸大家都转危为安之余，鹅计划要做好安全准备。梯子已经做了一半，现在研究怎么搞个kill switch。如果航行中落水，起码船别先自己跑了。电马达虽然不快，但鹅如果穿着防寒衣裤和救生衣一定游得更慢。
网上已经研究过大概三种方案:
1.Kill switch用条绳连在身上
2.Momentary switch装在马达把手上，要一直按着才有电到马达
3.Momentary food switch,踩着才通电 (这个好像是自己琢磨的)
不知道各位有没有经验分享一下

[johndxu]

买个邮吗打靠谱解决很多问题

[Fishingdaddy]

买个邮吗打靠谱解决很多问题

Option 4

[Sergeantpepper]

狗繩扣腰算球 另端缚battery cable clip

[Fishingdaddy]

狗繩扣腰算球 另端缚battery cable clip

最简单粗暴的方案，我喜欢
马达自带的电线街头是用螺丝上紧到电池上，怕拉不开，是不是要改一个成alligator clip?

[Sergeantpepper]

Seriously you may DIY like this guy did, getting the right sized heavy-current pull switch....
but hey what the heck, why not pull the alligator clip direct

phpBB [video]

[Sergeantpepper]

https://www.amazon.com/Volt-Battery-Disconnect-Kill-Switch/dp/B007O0BBFM 300Amp / CAD8.58

[风帆扬]

狗繩扣腰算球 另端缚battery cable clip

这个确实简单可行。但我准备升级到电池合，用XT90 直流插头，这个不容易拨出来。换成香焦插头也许可以。

[比肩而立]

可否將馬达叶轮沒水深度设置於：人在船上，沒入水中行进；人不在船上，在水面空转？这个可能只适合船身轻如充氣船的特別情況。启航前可試試，夏天時也可跳入湖水練習調整一下，救身衣当然要穿著。

[风帆扬]

可否將馬达叶轮沒水深度设置於：人在船上，沒入水中行进；人不在船上，在水面空转？这个可能只适合船身轻如充氣船的特別情況。启航前可試試，夏天時也可跳入湖水練習調整一下，救身衣当然要穿著。

空转更危险，截肢利器

[Sergeantpepper]

Seriously you may DIY like this guy did, getting the right sized heavy-current pull switch....
but hey what the heck, why not pull the alligator clip direct

VideoID: https://youtu.be/gRZBq-F2_Ek

再想....繩拉alligator clip 後, 马达是停了, 但人和cable 仍連在一起, 船的衝力拖着人走一小段, 可能會令cable 及其固定物受了力...这个还得考慮一下

用XT90 , 也得考慮一下這問題

better use this THING
https://www.amazon.com/Volt-Battery-Disconnect-Kill-Switch/dp/B007O0BBFM 300Amp/ CAD8.59

[风帆扬]

Seriously you may DIY like this guy did, getting the right sized heavy-current pull switch....
but hey what the heck, why not pull the alligator clip direct

VideoID: https://youtu.be/gRZBq-F2_Ek

再想....繩拉alligator clip 後, 马达是停了, 但人和cable 仍連在一起, 船的衝力拖着人走一小段, 可能會令cable 及其固定物受了力...这个还得考慮一下

用XT90 , 也得考慮一下這問題

better use this THING
https://www.amazon.com/Volt-Battery-Disconnect-Kill-Switch/dp/B007O0BBFM 300Amp/ CAD8.59

同意， 这个是最专业的方案，价钱也合理。

[Fishingdaddy]

Seriously you may DIY like this guy did, getting the right sized heavy-current pull switch....
but hey what the heck, why not pull the alligator clip direct

VideoID: https://youtu.be/gRZBq-F2_Ek

再想....繩拉alligator clip 後, 马达是停了, 但人和cable 仍連在一起, 船的衝力拖着人走一小段, 可能會令cable 及其固定物受了力...这个还得考慮一下

用XT90 , 也得考慮一下這問題

better use this THING
https://www.amazon.com/Volt-Battery-Disconnect-Kill-Switch/dp/B007O0BBFM 300Amp/ CAD8.59

我也在研究这个，还没确定那个钥匙插好转90度后会不会锁住。另一个直接拔出来的就没问题。

[Sergeantpepper]

this one then, pull-pin type

https://www.amazon.ca/Waterblade-Battery-Disconnect-Safety-Switch/dp/B06XP633CC 130Amp/ CAD31

[Fishingdaddy]

this one then, pull-pin type

https://www.amazon.ca/Waterblade-Battery-Disconnect-Safety-Switch/dp/B06XP633CC 130Amp/ CAD31

好东西就一个字:贵

[Fishingdaddy]

This guy says it's ok. His DIYs are very good.
https://youtu.be/4TGGZ4mW9JY

[Sergeantpepper]

This guy says it's ok. His DIYs are very good.
https://youtu.be/4TGGZ4mW9JY

tell you what...this video and the one i posted earlier were created by the same guy ..Aksman

the pull-pin type was dated Nov 24 2018
this turn-key type was dated Jun 15 2017

does that ring the bell ?

[Fishingdaddy]

This guy says it's ok. His DIYs are very good.
https://youtu.be/4TGGZ4mW9JY

tell you what...this video and the one i posted earlier were created by the same guy ..Aksman

the pull-pin type was dated Nov 24 2018
this turn-key type was dated Jun 15 2017

does that ring the bell ?

I watched the pull pin one first and knew it's from the same guy.