分页: 1 / 1

电马达kill switch

帖子发表于 : 05 5月 2020 09:31
Fishingdaddy
这几天深挖安全相关的贴,看了站友3次落水的经历,庆幸大家都转危为安之余,鹅计划要做好安全准备。梯子已经做了一半,现在研究怎么搞个kill switch。如果航行中落水,起码船别先自己跑了。电马达虽然不快,但鹅如果穿着防寒衣裤和救生衣一定游得更慢。
网上已经研究过大概三种方案:
1.Kill switch用条绳连在身上
2.Momentary switch装在马达把手上,要一直按着才有电到马达
3.Momentary food switch,踩着才通电 (这个好像是自己琢磨的)
不知道各位有没有经验分享一下 :shake

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 09:56
johndxu
买个邮吗打靠谱解决很多问题

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 10:02
Fishingdaddy
johndxu @ 05 May 2020 09:56 写道: 买个邮吗打靠谱解决很多问题

Option 4 :shake

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 10:08
Sergeantpepper
狗繩扣腰算球 :shout 另端缚battery cable clip

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 10:23
Fishingdaddy
Sergeantpepper @ 05 May 2020 10:08 写道: 狗繩扣腰算球 :shout 另端缚battery cable clip

最简单粗暴的方案,我喜欢 :up
马达自带的电线街头是用螺丝上紧到电池上,怕拉不开,是不是要改一个成alligator clip?

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 10:41
Sergeantpepper
Seriously you may DIY like this guy did, getting the right sized heavy-current pull switch....
but hey what the heck, why not pull the alligator clip direct :laugh3

phpBB [video]

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 10:52
Sergeantpepper

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 10:54
风帆扬
Sergeantpepper @ 05 May 2020 10:08 写道: 狗繩扣腰算球 :shout 另端缚battery cable clip

这个确实简单可行。但我准备升级到电池合,用XT90 直流插头,这个不容易拨出来。换成香焦插头也许可以。

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 12:45
比肩而立
可否將馬达叶轮沒水深度设置於:人在船上,沒入水中行进;人不在船上,在水面空转?这个可能只适合船身轻如充氣船的特別情況。启航前可試試,夏天時也可跳入湖水練習調整一下,救身衣当然要穿著。

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 12:55
风帆扬
比肩而立 @ 05 May 2020 12:45 写道: 可否將馬达叶轮沒水深度设置於:人在船上,沒入水中行进;人不在船上,在水面空转?这个可能只适合船身轻如充氣船的特別情況。启航前可試試,夏天時也可跳入湖水練習調整一下,救身衣当然要穿著。

空转更危险,截肢利器

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 13:03
Sergeantpepper
Sergeantpepper @ Tue May 05, 2020 10:41 am 写道: Seriously you may DIY like this guy did, getting the right sized heavy-current pull switch....
but hey what the heck, why not pull the alligator clip direct :laugh3

VideoID: https://youtu.be/gRZBq-F2_Ek


再想....繩拉alligator clip 後, 马达是停了, 但人和cable 仍連在一起, 船的衝力拖着人走一小段, 可能會令cable 及其固定物受了力...这个还得考慮一下

用XT90 , 也得考慮一下這問題

better use this THING
https://www.amazon.com/Volt-Battery-Disconnect-Kill-Switch/dp/B007O0BBFM 300Amp/ CAD8.59

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 13:46
风帆扬
Sergeantpepper @ 05 May 2020 13:03 写道:
Sergeantpepper @ Tue May 05, 2020 10:41 am 写道: Seriously you may DIY like this guy did, getting the right sized heavy-current pull switch....
but hey what the heck, why not pull the alligator clip direct :laugh3

VideoID: https://youtu.be/gRZBq-F2_Ek


再想....繩拉alligator clip 後, 马达是停了, 但人和cable 仍連在一起, 船的衝力拖着人走一小段, 可能會令cable 及其固定物受了力...这个还得考慮一下

用XT90 , 也得考慮一下這問題

better use this THING
https://www.amazon.com/Volt-Battery-Disconnect-Kill-Switch/dp/B007O0BBFM 300Amp/ CAD8.59


同意, 这个是最专业的方案,价钱也合理。 :shake

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 15:31
Fishingdaddy
Sergeantpepper @ 05 May 2020 13:03 写道:
Sergeantpepper @ Tue May 05, 2020 10:41 am 写道: Seriously you may DIY like this guy did, getting the right sized heavy-current pull switch....
but hey what the heck, why not pull the alligator clip direct :laugh3

VideoID: https://youtu.be/gRZBq-F2_Ek


再想....繩拉alligator clip 後, 马达是停了, 但人和cable 仍連在一起, 船的衝力拖着人走一小段, 可能會令cable 及其固定物受了力...这个还得考慮一下

用XT90 , 也得考慮一下這問題

better use this THING
https://www.amazon.com/Volt-Battery-Disconnect-Kill-Switch/dp/B007O0BBFM 300Amp/ CAD8.59

我也在研究这个,还没确定那个钥匙插好转90度后会不会锁住。另一个直接拔出来的就没问题。

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 15:54
Sergeantpepper

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 16:17
Fishingdaddy
Sergeantpepper @ 05 May 2020 15:54 写道: this one then, pull-pin type :laugh3

https://www.amazon.ca/Waterblade-Battery-Disconnect-Safety-Switch/dp/B06XP633CC 130Amp/ CAD31


好东西就一个字:贵 :laugh3

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 17:39
Fishingdaddy
This guy says it's ok. His DIYs are very good.
https://youtu.be/4TGGZ4mW9JY

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 18:28
Sergeantpepper
Fishingdaddy @ Tue May 05, 2020 5:39 pm 写道: This guy says it's ok. His DIYs are very good.
https://youtu.be/4TGGZ4mW9JY


tell you what...this video and the one i posted earlier were created by the same guy ..Aksman

the pull-pin type was dated Nov 24 2018
this turn-key type was dated Jun 15 2017

does that ring the bell ? :laugh3

Re: 电马达kill switch

帖子发表于 : 05 5月 2020 18:53
Fishingdaddy
Sergeantpepper @ 05 May 2020 18:28 写道:
Fishingdaddy @ Tue May 05, 2020 5:39 pm 写道: This guy says it's ok. His DIYs are very good.
https://youtu.be/4TGGZ4mW9JY


tell you what...this video and the one i posted earlier were created by the same guy ..Aksman

the pull-pin type was dated Nov 24 2018
this turn-key type was dated Jun 15 2017

does that ring the bell ? :laugh3

I watched the pull pin one first and knew it's from the same guy. :shake