Toronto Fishing Forum

一家人都是钓鱼狂热分子，总是借朋友船出行感觉不合适，所以想买艘钓鱼船，预算在2万左右，求各位有经验的钓友推荐一款性价比高的。目标湖是死狗狗或米湖,最少坐3人的，谢谢了

没买过，帮顶

fzhao3 写道:一家人都是钓鱼狂热分子，总是借朋友船出行感觉不合适，所以想买艘钓鱼船，预算在2万左右，求各位有经验的钓友推荐一款性价比高的。目标湖是死狗狗或米湖,最少坐3人的，谢谢了

等到年底清仓的时候去bass pro，买nitro Z6

不都说Lund船好吗。还保值。
http://www.lundboats.ca/boats/fiberglass

面积大的是不是好用一点儿？不推荐太快的，有一定的危险性。。。这种小湖，深V是没必要的。

风雨 写道:面积大的是不是好用一点儿？不推荐太快的，有一定的危险性。。。这种小湖，深V是没必要的。

我也是这么想的,马达小一点就好

XUYCA 写道:不都说Lund船好吗。还保值。
http://www.lundboats.ca/boats/fiberglass

Fiberglass船我的车拖不了

fzhao3 写道:

风雨 写道:面积大的是不是好用一点儿？不推荐太快的，有一定的危险性。。。这种小湖，深V是没必要的。

我也是这么想的,马达小一点就好

60屁还是要的。

william 写道:

fzhao3 写道:一家人都是钓鱼狂热分子，总是借朋友船出行感觉不合适，所以想买艘钓鱼船，预算在2万左右，求各位有经验的钓友推荐一款性价比高的。目标湖是死狗狗或米湖,最少坐3人的，谢谢了

等到年底清仓的时候去bass pro，买nitro Z6

nitro的船那么便宜？不过TRACKER/NITRO评价不怎么样啊，还是LUND 或者PRINCE CRAFT好

creativeccc 写道:

william 写道:

fzhao3 写道:一家人都是钓鱼狂热分子，总是借朋友船出行感觉不合适，所以想买艘钓鱼船，预算在2万左右，求各位有经验的钓友推荐一款性价比高的。目标湖是死狗狗或米湖,最少坐3人的，谢谢了

等到年底清仓的时候去bass pro，买nitro Z6

nitro的船那么便宜？不过TRACKER/NITRO评价不怎么样啊，还是LUND 或者PRINCE CRAFT好

几大品牌，都差不多的，不会有性价比遥遥领先的某个牌子。

LEGEND也是可以接受的，看价钱和保修了。再一个看layout是否喜欢。

俺用的LEGEND, 多年来木啥问题。

开条破船，提不出啥建议。只知道2w能买条令人眼红的牛船。
羡慕LZ能全家垂钓。

clarkstone 写道:开条破船，提不出啥建议。只知道2w能买条令人眼红的牛船。
羡慕LZ能全家垂钓。

不管新船旧船，能上鱼就是好船。

Saw this ad. from another site (same ad. found in kijiji too)
If everything's in line as listed, that could be a steal...for an almost untouched rig

====================================================================
2013 LUND FURY

16 feet Lund Fury with side console; Mercury four stroke 40 HP outboard motor; Electric start with power trim and tilt; Bought new July 2013; Used three (3) times last year with less than 15 hours on motor; Aerated live well; Lockable rod storage compartments; Motor Guide 55 LB wireless trolling motor; Custom made mooring cover; Matching trailer with boat trailer guide-on; Bicycle seat with lean post; Garmin GPS Map 720s touch screen GPS / fishfinder. Health issue forces sale; Not a scratch on the boat - boat has to be seen to be appreciated. Replacement cost over $ 17,000.00. Asking $ 12,500.00 or best offer. Call or text 647-282-2938.
====================================================================

2014 Lund 1600SS Fury

[youtube]http://www.youtube.com/watch?v=Uqq7RDa1ehY[/youtube]

Sergeantpepper 写道:Saw this ad. from another site (same ad. found in kijiji too)
If everything's in line as listed, that could be a steal...for an almost untouched rig

====================================================================
2013 LUND FURY

16 feet Lund Fury with side console; Mercury four stroke 40 HP outboard motor; Electric start with power trim and tilt; Bought new July 2013; Used three (3) times last year with less than 15 hours on motor; Aerated live well; Lockable rod storage compartments; Motor Guide 55 LB wireless trolling motor; Custom made mooring cover; Matching trailer with boat trailer guide-on; Bicycle seat with lean post; Garmin GPS Map 720s touch screen GPS / fishfinder. Health issue forces sale; Not a scratch on the boat - boat has to be seen to be appreciated. Replacement cost over $ 17,000.00. Asking $ 12,500.00 or best offer. Call or text 647-282-2938.
====================================================================

我们的论坛里也有此 AD 被贴出:

http://xiaolujin.com/phpbb/viewtopic.php?f=6&t=4357

Oops...I dont frequent the B&S section too often ..tks

YB那边好象有人卖船呢，去看看。

亚新 写道:YB那边好象有人卖船呢，去看看。

Same deal as this one
Dont promote other site here
j/k w/ U

有一个问题，铝船和Fiber Glass 除了重量上的区别，哪各优点更多。

XUYCA 写道:有一个问题，铝船和Fiber Glass 除了重量上的区别，哪各优点更多。

For fiberglass, once it's cracked it's almost finished...but cracks can be hidden by adding gel coats to cover up without the buyer knowing
....in fact weight alone is already a big issue, more gas on towing vehicle & boat, higher HP on motor req'd for the same performance
...Glass however provides smoother rides for the surface finish and the conrnerless hull configuration that can only be achieved by the fiberglass process
...Tracker aluminum "Tundra" bassboat had employed the explosion technology to form a 1-pc al.hull like a glass boat (with the transom welded on)...but that model seems to had been discintinued in the recent years

不知道为什么这些LUND Boat Dealer都喜欢在kijiji上做广告，上次帮朋友去LUNDDealer买船的时候，就看到他们到kijiji上找有关的信息！
http://www.kijiji.ca/v-powerboat-motorb ... nFlag=true

http://www.kijiji.ca/v-powerboat-motorb ... nFlag=true

It's free to use...hi hit rate too

Sergeantpepper 写道:

XUYCA 写道:有一个问题，铝船和Fiber Glass 除了重量上的区别，哪各优点更多。

For fiberglass, once it's cracked it's almost finished...but cracks can be hidden by adding gel coats to cover up without the buyer knowing
....in fact weight alone is already a big issue, more gas on towing vehicle & boat, higher HP on motor req'd for the same performance
...Glass however provides smoother rides for the surface finish and the conrnerless hull configuration that can only be achieved by the fiberglass process
...Tracker aluminum "Tundra" bassboat had employed the explosion technology to form a 1-pc al.hull like a glass boat (with the transom welded on)...but that model seems to had been discintinued in the recent years

It makes sense. I prefer Aluminum boat for the gas saving.

fzhao3 写道:一家人都是钓鱼狂热分子，总是借朋友船出行感觉不合适，所以想买艘钓鱼船，预算在2万左右，求各位有经验的钓友推荐一款性价比高的。目标湖是死狗狗或米湖,最少坐3人的，谢谢了

bring a friend that you trusted, which also knows about boats/alum, fiberglass and engine/mechanic stuff. ask him to go alone with you, inspect the boat from top to bottom, left to right, in and out before u hand your money out.

william 写道:

fzhao3 写道:一家人都是钓鱼狂热分子，总是借朋友船出行感觉不合适，所以想买艘钓鱼船，预算在2万左右，求各位有经验的钓友推荐一款性价比高的。目标湖是死狗狗或米湖,最少坐3人的，谢谢了

等到年底清仓的时候去bass pro，买nitro Z6

if lz is buying his first fishing boat, i do not recommend fiberglass/bassboat, aluminum / lund is very good option.