万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#1  帖子startlearn » 12 3月 2014 00:23

请各位帮忙: 請問那裡能夠買到 8" ice drill (auger) blade 刀片

上個月剛剛在 BassPro 買的 手動 ice drill 冰鑽, 8 in.

由於沒有經驗,也沒有太在意, 只用了兩次.
今天打開一看, 只剩下一個刀片 (blade), (每個刀片有兩個小螺絲). 丟了一個刀片 和兩個小螺絲.
(這個 ice drill 設計太差了, 螺絲太短, 極易松动和丟失)

請問那裡能夠買到 8" ice drill (auger) blade (刀片), 否则這個auger 就完全沒有用了.


先謝謝了
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#2  帖子xiaolu » 12 3月 2014 06:31

startlearn 写道:请各位帮忙: 請問那裡能夠買到 8" ice drill (auger) blade 刀片

上個月剛剛在 BassPro 買的 手動 ice drill 冰鑽, 8 in.

由於沒有經驗,也沒有太在意, 只用了兩次.
今天打開一看, 只剩下一個刀片 (blade), (每個刀片有兩個小螺絲). 丟了一個刀片 和兩個小螺絲.
(這個 ice drill 設計太差了, 螺絲太短, 極易松动和丟失)

請問那裡能夠買到 8" ice drill (auger) blade (刀片), 否则這個auger 就完全沒有用了.


先謝謝了

Hwy 7 & Hwy 400 附近的 SAIL 店里有很多, 各种各样的, 注意要买和你的型号一样的. 不妨拿上你的钻去配的买...
xiaolu
Site Admin (站长)
 
帖子: 42778
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#3  帖子wenxiuxuan » 12 3月 2014 08:05

应该在Sail,BPS,Lebaron都会有卖,不过象你这种情况是不是可以让店家退款或者换一个。

:cold
wenxiuxuan
General (上将)
General (上将)
 
帖子: 10048
注册: 17 9月 2013 08:03
Member Number (论坛会员注册序列号): #3
地址: Richmond Hill

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#4  帖子wetnose » 12 3月 2014 11:31

冰钓的东西质量大多数不靠谱,俺的帐篷是第二个,冰钻是第二个,鱼竿也断过! :verysad
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#5  帖子白雪丹枫 » 12 3月 2014 11:36

wetnose 写道:冰钓的东西质量大多数不靠谱,俺的帐篷是第二个,冰钻是第二个,鱼竿也断过! :verysad


我今年在sail买了一根“8”的冰钓竿,用了两次线圈就坏了。 :cry
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14863
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#6  帖子wetnose » 12 3月 2014 11:58

可以退换的,我的那根断的杆子都给换了!SAIL在退换这方面别的店比不了! :up
白雪丹枫 写道:
wetnose 写道:冰钓的东西质量大多数不靠谱,俺的帐篷是第二个,冰钻是第二个,鱼竿也断过! :verysad


我今年在sail买了一根“8”的冰钓竿,用了两次线圈就坏了。 :cry
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#7  帖子wenxiuxuan » 12 3月 2014 12:05

wetnose 写道:冰钓的东西质量大多数不靠谱,俺的帐篷是第二个,冰钻是第二个,鱼竿也断过! :verysad


哥们你太粗暴了吧。
:laugh3
wenxiuxuan
General (上将)
General (上将)
 
帖子: 10048
注册: 17 9月 2013 08:03
Member Number (论坛会员注册序列号): #3
地址: Richmond Hill

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#8  帖子白雪丹枫 » 12 3月 2014 12:10

wetnose 写道:可以退换的,我的那根断的杆子都给换了!SAIL在退换这方面别的店比不了! :up
白雪丹枫 写道:
wetnose 写道:冰钓的东西质量大多数不靠谱,俺的帐篷是第二个,冰钻是第二个,鱼竿也断过! :verysad


我今年在sail买了一根“8”的冰钓竿,用了两次线圈就坏了。 :cry


是的。我不想换同样的鱼竿,就换了几个浮漂和其他FLOAT FISHING的东西。
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14863
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#9  帖子wenxiuxuan » 12 3月 2014 12:14

白雪丹枫 写道:
wetnose 写道:可以退换的,我的那根断的杆子都给换了!SAIL在退换这方面别的店比不了! :up
白雪丹枫 写道:
wetnose 写道:冰钓的东西质量大多数不靠谱,俺的帐篷是第二个,冰钻是第二个,鱼竿也断过! :verysad


我今年在sail买了一根“8”的冰钓竿,用了两次线圈就坏了。 :cry


是的。我不想换同样的鱼竿,就换了几个浮漂和其他FLOAT FISHING的东西。


Sail的服务还是没得说的。
:cold
wenxiuxuan
General (上将)
General (上将)
 
帖子: 10048
注册: 17 9月 2013 08:03
Member Number (论坛会员注册序列号): #3
地址: Richmond Hill

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#10  帖子白雪丹枫 » 12 3月 2014 12:16

wenxiuxuan 写道:
白雪丹枫 写道:
wetnose 写道:可以退换的,我的那根断的杆子都给换了!SAIL在退换这方面别的店比不了! :up
白雪丹枫 写道:
wetnose 写道:冰钓的东西质量大多数不靠谱,俺的帐篷是第二个,冰钻是第二个,鱼竿也断过! :verysad


我今年在sail买了一根“8”的冰钓竿,用了两次线圈就坏了。 :cry


是的。我不想换同样的鱼竿,就换了几个浮漂和其他FLOAT FISHING的东西。


Sail的服务还是没得说的。
:cold


价钱也好。 :up 所以现在买东西都先去SAIL。
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14863
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#11  帖子wenxiuxuan » 12 3月 2014 12:42

白雪丹枫 写道:价钱也好。 :up 所以现在买东西都先去SAIL。


对,所以我一般都是到其他地方找价格,然后到Sail去Match。
:laugh3
wenxiuxuan
General (上将)
General (上将)
 
帖子: 10048
注册: 17 9月 2013 08:03
Member Number (论坛会员注册序列号): #3
地址: Richmond Hill

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#12  帖子startlearn » 13 3月 2014 15:58

多謝各位帮忙指點,
昨天冒著暴風雪去了三家 Basspro. Sail and LeBorn.
因為這是 Basspro 的產品, Sail and LeBorn. 沒有不買.

Basspro all the ice drill (Auger) and replacement parts were sold out. they can't find anything becasue of season over.
and the blade is not under warranty.

所以 只用了 2-3 次的幾乎就成了沒用的拉吉.

再次感謝
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#13  帖子Sergeantpepper » 13 3月 2014 16:29

Dont give up sourcing
the ice season is far from over yet :shout

try LeBaron...
http://www.lebaron.ca/pdf_files_fall12/ ... drills.pdf
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#14  帖子梦飞 » 13 3月 2014 17:03

白雪丹枫 写道:
wetnose 写道:冰钓的东西质量大多数不靠谱,俺的帐篷是第二个,冰钻是第二个,鱼竿也断过! :verysad


我今年在sail买了一根“8”的冰钓竿,用了两次线圈就坏了。 :cry


冰钓竿也要买好牌子的,俺有一只St. Croix 用了好多年,质量实在没的说。
梦飞
Major General (少将)
Major General (少将)
 
帖子: 889
注册: 17 9月 2013 17:12
Member Number (论坛会员注册序列号): #20
地址: Etobicoke

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#15  帖子花花 » 13 3月 2014 18:33

8寸的手钻本身就是垃圾, 刀片目前只有轮胎店有, 看牌子和型号,网上肯定能买到的。。。。。。。。。
花花
Second Lieutenant (少尉)
 
帖子: 14
注册: 09 3月 2014 21:03
Member Number (论坛会员注册序列号): #328

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#16  帖子白雪丹枫 » 13 3月 2014 19:39

startlearn 写道:多謝各位帮忙指點,
昨天冒著暴風雪去了三家 Basspro. Sail and LeBorn.
因為這是 Basspro 的產品, Sail and LeBorn. 沒有不買.

Basspro all the ice drill (Auger) and replacement parts were sold out. they can't find anything becasue of season over.
and the blade is not under warranty.

所以 只用了 2-3 次的幾乎就成了沒用的拉吉.

再次感謝


等下个冬天来吧,他们会进货的。同情一下!
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14863
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#17  帖子边走边钓 » 14 3月 2014 00:33

大部分冰钻应该都是Nordic的,刀片也是一样,他有很多的子品牌,就算牌子不同,只要螺丝眼能对上,应该是可以互换的,你应该去CT ,SAIL Le Baron 去看看。建议你以后少去basspro,贵且傲慢。
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#18  帖子iamfisherman » 14 3月 2014 01:28

俺还有两套备用的,是以前给8寸油钻买的
iamfisherman
General (上将)
General (上将)
 
帖子: 6184
注册: 17 9月 2013 20:32
Member Number (论坛会员注册序列号): #23
地址: 16TH & Kennedy, Markham
称呼: 参谋长

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#19  帖子startlearn » 14 3月 2014 07:47

拿着我的 ice drill 分别 去了 Le Baron and Sail. (show the salesman).
他们都说, 我们不卖 Basspro的东西.
(they both said. we don't carry Basspro stuff. and can't be fit).

您说的太對了 "basspro,贵且傲慢". 以前认为Basspro 最大且最好. 我错了!

今天再去 CT 看看

再次感謝各位大师.
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#20  帖子xiaolu » 14 3月 2014 08:02

startlearn 写道:拿着我的 ice drill 分别 去了 Le Baron and Sail. (show the salesman).
他们都说, 我们不卖 Basspro的东西.
(they both said. we don't carry Basspro stuff. and can't be fit).

您说的太對了 "basspro,贵且傲慢". 以前认为Basspro 最大且最好. 我错了!

今天再去 CT 看看

再次感謝各位大师.

到了店里后, 请不要和卖东西的提起你的钻是在 BASS PRO 买的. 你只需要拿你的钻和货架上的刀对比看是否配套. 这个钻并不是 BASS PRO 自己生产制造的品牌啊, 和 BASS PRO 没关系... (比如: 如果 BASS PRO 是我的生意的对手, 您到我这里要服务并提起 BASS PRO, 估计我也不给您提供任何服务啊, 对吧? )
xiaolu
Site Admin (站长)
 
帖子: 42778
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#21  帖子Sergeantpepper » 14 3月 2014 08:34

With all these talks...what brand & model of auger are we talking about? :feed
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#22  帖子边走边钓 » 14 3月 2014 10:32

是的,你就拿着你的刀片去比一下不就行了吗?

xiaolu 写道:
startlearn 写道:拿着我的 ice drill 分别 去了 Le Baron and Sail. (show the salesman).
他们都说, 我们不卖 Basspro的东西.
(they both said. we don't carry Basspro stuff. and can't be fit).

您说的太對了 "basspro,贵且傲慢". 以前认为Basspro 最大且最好. 我错了!

今天再去 CT 看看

再次感謝各位大师.

到了店里后, 请不要和卖东西的提起你的钻是在 BASS PRO 买的. 你只需要拿你的钻和货架上的刀对比看是否配套. 这个钻并不是 BASS PRO 自己生产制造的品牌啊, 和 BASS PRO 没关系... (比如: 如果 BASS PRO 是我的生意的对手, 您到我这里要服务并提起 BASS PRO, 估计我也不给您提供任何服务啊, 对吧? )
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#23  帖子边走边钓 » 14 3月 2014 10:33

:laugh3
Sergeantpepper 写道:With all these talks...what brand & model of auger are we talking about? :feed
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#24  帖子startlearn » 16 3月 2014 00:59

今天突然接到 Basspro fishing department manager 的電話:

他告訴我, 他非常理解我的處境, 因為這個 model 是 Basspro product, 他專門去 distribution center 查找,
如果有庫存, 他要給我order and 給我打電話. 讓我耐心等待.

看樣子 Basspro service 服務還很好。是我錯怪他們了, 這回我又错了



He said he understands my situation, he try to help me.
if he can find in the distribution center, he is going to order and call me.
but now the season is over. he is not sure and just wait.

BTW: my model is "Basspro extream ICE" 8 in (this is Basspro told me)

再次感謝各位大师的回帖和關懷
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 万能的论坛,請問那裡能夠買到 8" ice drill (auger) blade (刀片)

楼层:#25  帖子wenxiuxuan » 16 3月 2014 05:24

让Bps帮你定一个确实是最好的解决方案,你就慢慢等吧。
wenxiuxuan
General (上将)
General (上将)
 
帖子: 10048
注册: 17 9月 2013 08:03
Member Number (论坛会员注册序列号): #3
地址: Richmond Hill


回到 It's All About Fishin' 钓鱼!

在线用户