大家帮我参谋一下,这套冰钓装备怎么样?

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#26  帖子wetnose » 27 11月 2019 21:11

Sergeantpepper @ Wed Nov 27, 2019 8:05 pm 写道: forget about that home made sled, looks heavy and parts un-detachable
never buy ice auger pre-owned unless you have used it before hand...bent shaft, blunt cutting blades are possibilities

Sail- Rapala Nordic Ice Auger 8"........63.99
Amazon- Frabill HQ100 5'x5'hub.......189.99
C Tire- Pelican Snow Trek 60 Ice Sled....62.99

you do the math, buying all these new you ain't paying much extra than 300

帐篷还可以再便宜一些,Outbound Crystal Ice Shelter, 2-Person $148.99
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#27  帖子xiaolu » 27 11月 2019 21:17

wetnose @ Wed Nov 27, 2019 7:48 pm 写道:
jsyangyu @ Wed Nov 27, 2019 7:42 pm 写道:
wetnose @ 27 Nov 2019 19:31 写道:
看这个价钱肯定是不行。如果上Dewalt,就DCD991可以! :shake
_$027N.JPG

其他的牌子有什么推荐的吗? 我还以为18V 的钻力量都差不多 :redfaced 没想到能有两三倍的差别。

其他牌子用的比较多的就Milwaukee的 M18 FUEL Hammer Drill (2804-20) brushless motor delivers 1,200-Inch/lbs. of peak torque

嗯, 鹅墙裂推荐 MILWAUKEE 的 M18 FUEL 钻, 钻本身的型号: 2704-20 或者 2804-20

MILWAUKEE 有卖很多的套装包括钻,电池和充电器, 整个套装的型号为比如 2704-2X, 2804-某某某, 这都不是事儿。 重要的是, makre sure 其中的钻的本身, 我再强调一下,是说标在钻的本身上的型号是 2704-20 或者 2804-20
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
xiaolu
Site Admin (站长)
 
帖子: 42778
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#28  帖子风帆扬 » 27 11月 2019 21:22

多谢楼上几位大神的好建议,如果是这样的话也可加点钱买HQ200的 6’ tent 。outbound too heavy.
风帆扬
Major General (少将)
Major General (少将)
 
帖子: 824
注册: 21 6月 2019 05:51
Member Number (论坛会员注册序列号): #2653
地址: Brampton, ON
称呼: Charlie

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#29  帖子wetnose » 27 11月 2019 21:23

xiaolu @ Wed Nov 27, 2019 8:17 pm 写道:
wetnose @ Wed Nov 27, 2019 7:48 pm 写道:
jsyangyu @ Wed Nov 27, 2019 7:42 pm 写道:
其他的牌子有什么推荐的吗? 我还以为18V 的钻力量都差不多 :redfaced 没想到能有两三倍的差别。

其他牌子用的比较多的就Milwaukee的 M18 FUEL Hammer Drill (2804-20) brushless motor delivers 1,200-Inch/lbs. of peak torque

嗯, 鹅墙裂推荐 MILWAUKEE 的 M18 FUEL 钻, 钻本身的型号: 2704-20 或者 2804-20

MILWAUKEE 有卖很多的套装包括钻,电池和充电器, 整个套装的型号为比如 2704-2X, 2804-某某某, 这都不是事儿。 重要的是, makre sure 其中的钻的本身, 我再强调一下,是说标在钻的本身上的型号是 2704-20 或者 2804-20

我有一套也是2704-20,是第二代的,这个2804-20是第三代!但是它们都是1,200-Inch/lbs. of peak torque!

我几年前买点2604-20是第一代,725-Inch/lbs. of peak torque
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#30  帖子阿恩 » 27 11月 2019 21:26

jsyangyu @ 周三 11月 27, 2019 7:09 pm 写道: 有看到型号和转速,没有看到扭力啊?

你这个年分比较久了吧?估计不行,那时候还没什么高扭矩的钻,有肯定也是天价,一般人也不一定舍得买。还有就是电池,老了也不给力。还有,大家不要认为rigid是杂牌啊,它也算是老名牌了,而且号称终生保用的,如果你的坏了说不定能换个新的回来哦。
阿恩
General (上将)
General (上将)
 
帖子: 6705
注册: 18 11月 2013 11:46
Member Number (论坛会员注册序列号): #193
地址: Steeles & Don Mills, North York

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#31  帖子xiaolu » 27 11月 2019 21:29

wetnose @ Wed Nov 27, 2019 8:23 pm 写道:
xiaolu @ Wed Nov 27, 2019 8:17 pm 写道:
wetnose @ Wed Nov 27, 2019 7:48 pm 写道:
其他牌子用的比较多的就Milwaukee的 M18 FUEL Hammer Drill (2804-20) brushless motor delivers 1,200-Inch/lbs. of peak torque

嗯, 鹅墙裂推荐 MILWAUKEE 的 M18 FUEL 钻, 钻本身的型号: 2704-20 或者 2804-20

MILWAUKEE 有卖很多的套装包括钻,电池和充电器, 整个套装的型号为比如 2704-2X, 2804-某某某, 这都不是事儿。 重要的是, makre sure 其中的钻的本身, 我再强调一下,是说标在钻的本身上的型号是 2704-20 或者 2804-20

我有一套也是2704-20,是第二代的,这个2804-20是第三代!但是它们都是1,200-Inch/lbs. of peak torque!

我几年前买点2604-20是第一代,725-Inch/lbs. of peak torque

正解 :up 。 2704-20 和 2804-20 的扭矩一样 1200 IN-LBS, 但 2804-20 是最新款,那个套在钻上的把手(手柄)有改进。 我的也是 2604-20 (现在当家里的工具用了)和 2704-20 (冰上打洞用)
xiaolu
Site Admin (站长)
 
帖子: 42778
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#32  帖子Sergeantpepper » 27 11月 2019 21:39

Pls note that only cordless drill with 1/2" chuck diameter can fit with the ice auger adapter that connects the drill to the auger.......general purpose drills are of 3/8" only

https://www.canadiantire.ca/en/pdp/electric-ice-drill-adapter-0788167p.0788167.html?gclid=Cj0KCQiA2vjuBRCqARIsAJL5a-IU0CmQrMhHn9Txm4BEksH7cDRY6fwR0BT_95mPAhi3YZw3JK_hkssaAkT1EALw_wcB&gclsrc=aw.ds#store=164
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#33  帖子wetnose » 27 11月 2019 21:45

xiaolu @ Wed Nov 27, 2019 8:29 pm 写道:
wetnose @ Wed Nov 27, 2019 8:23 pm 写道:
xiaolu @ Wed Nov 27, 2019 8:17 pm 写道:
嗯, 鹅墙裂推荐 MILWAUKEE 的 M18 FUEL 钻, 钻本身的型号: 2704-20 或者 2804-20

MILWAUKEE 有卖很多的套装包括钻,电池和充电器, 整个套装的型号为比如 2704-2X, 2804-某某某, 这都不是事儿。 重要的是, makre sure 其中的钻的本身, 我再强调一下,是说标在钻的本身上的型号是 2704-20 或者 2804-20

我有一套也是2704-20,是第二代的,这个2804-20是第三代!但是它们都是1,200-Inch/lbs. of peak torque!

我几年前买点2604-20是第一代,725-Inch/lbs. of peak torque

正解 :up 。 2704-20 和 2804-20 的扭矩一样 1200 IN-LBS, 但 2804-20 是最新款,那个套在钻上的把手有改进。 我的也是 2604-20 (现在当家里的工具用了)和 2704-20 (冰上打洞用)

我是两套都在用,2604-20是配的6寸钻,2704-20配的是8寸钻。看心情,想带哪个就带哪个! :laugh3
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#34  帖子xiaolu » 27 11月 2019 21:46

Sergeantpepper @ Wed Nov 27, 2019 8:39 pm 写道: Pls note that only cordless drill with 1/2" chuck diameter can fit with the ice auger adapter that connects the drill to the auger.......general purpose drills are of 3/8" only

https://www.canadiantire.ca/en/pdp/electric-ice-drill-adapter-0788167p.0788167.html?gclid=Cj0KCQiA2vjuBRCqARIsAJL5a-IU0CmQrMhHn9Txm4BEksH7cDRY6fwR0BT_95mPAhi3YZw3JK_hkssaAkT1EALw_wcB&gclsrc=aw.ds#store=164

True. And yes, Milwaukee 2704-20 or 2804-20 hammer drill/driver is indeed with 1/2" chuck.
xiaolu
Site Admin (站长)
 
帖子: 42778
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#35  帖子Sergeantpepper » 27 11月 2019 21:48

我的也是 2604-20 (现在当家里的工具用了)

what a waste! :laugh3 better find it a new owner :shout
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#36  帖子流浪 » 27 11月 2019 21:49

转一定要给力 看着别人上鱼 自己转不给力 着急呀
流浪
Brigadier General (大校/准将)
Brigadier General (大校/准将)
 
帖子: 250
注册: 11 11月 2013 14:33
Member Number (论坛会员注册序列号): #177

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#37  帖子Sergeantpepper » 27 11月 2019 21:50

xiaolu @ Wed Nov 27, 2019 8:46 pm 写道:
Sergeantpepper @ Wed Nov 27, 2019 8:39 pm 写道: Pls note that only cordless drill with 1/2" chuck diameter can fit with the ice auger adapter that connects the drill to the auger.......general purpose drills are of 3/8" only

https://www.canadiantire.ca/en/pdp/electric-ice-drill-adapter-0788167p.0788167.html?gclid=Cj0KCQiA2vjuBRCqARIsAJL5a-IU0CmQrMhHn9Txm4BEksH7cDRY6fwR0BT_95mPAhi3YZw3JK_hkssaAkT1EALw_wcB&gclsrc=aw.ds#store=164

True. And yes, Milwaukee 2704-20 or 2804-20 hammer drill/driver is indeed with 1/2" chuck.


Lz's Rigid in hand doesn't look like one to me :fishb let alone the torque concern
最后由 Sergeantpepper 编辑于 27 11月 2019 21:51,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#38  帖子xiaolu » 27 11月 2019 21:50

Sergeantpepper @ Wed Nov 27, 2019 8:48 pm 写道: 我的也是 2604-20 (现在当家里的工具用了)

what a waste! :laugh3 better find it a new owner :shout

家里干活也需要钻啊(每到干活需要钻时, 实在是懒得把固定在 CLAM ICE AUGER CONVERTER/PLATE 上的 2704-20 钻“拆”下来)
xiaolu
Site Admin (站长)
 
帖子: 42778
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#39  帖子xiaolu » 27 11月 2019 21:52

Sergeantpepper @ Wed Nov 27, 2019 8:50 pm 写道:
xiaolu @ Wed Nov 27, 2019 8:46 pm 写道:
Sergeantpepper @ Wed Nov 27, 2019 8:39 pm 写道: Pls note that only cordless drill with 1/2" chuck diameter can fit with the ice auger adapter that connects the drill to the auger.......general purpose drills are of 3/8" only

https://www.canadiantire.ca/en/pdp/electric-ice-drill-adapter-0788167p.0788167.html?gclid=Cj0KCQiA2vjuBRCqARIsAJL5a-IU0CmQrMhHn9Txm4BEksH7cDRY6fwR0BT_95mPAhi3YZw3JK_hkssaAkT1EALw_wcB&gclsrc=aw.ds#store=164

True. And yes, Milwaukee 2704-20 or 2804-20 hammer drill/driver is indeed with 1/2" chuck.


Lz's Rigid in hand doesn't look like one to me :fishb let alone the torque concern

嗯。 但是, 即使那个钻是 1/2“ 的 CHUCK 口径, 钻不给力, 还是白搭。
xiaolu
Site Admin (站长)
 
帖子: 42778
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#40  帖子流浪 » 27 11月 2019 22:08

总结一下 红色2704-20/22 2804-20/22 黄色996 其他的就别考虑了
流浪
Brigadier General (大校/准将)
Brigadier General (大校/准将)
 
帖子: 250
注册: 11 11月 2013 14:33
Member Number (论坛会员注册序列号): #177

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#41  帖子xiaolu » 27 11月 2019 22:13

流浪 @ Wed Nov 27, 2019 9:08 pm 写道: 总结一下 红色2704-20/22 2804-20/22 黄色996 其他的就别考虑了

嗯, 红色指的是 MILWAUKEE。 黄色的是 DeWALT。

DeWALT 的我没用过。但据说其中的 996 不错 (不是楼上 wetnose 说的 991)。
xiaolu
Site Admin (站长)
 
帖子: 42778
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#42  帖子Fishingdaddy » 27 11月 2019 22:17

看数据打冰洞996=991。996多个冲击钻功能。
Fishingdaddy
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2737
注册: 11 2月 2019 22:07
Member Number (论坛会员注册序列号): #2559

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#43  帖子Sergeantpepper » 27 11月 2019 22:26

Fishingdaddy @ Wed Nov 27, 2019 9:17 pm 写道: 看数据打冰洞996=991。996多个冲击钻功能。

你那新头像鵝研究了不少时间,应該不是PS出来的。。。就看摇晃的鉆身和雪上影子
有人去一試吗? :laugh3
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#44  帖子Sergeantpepper » 27 11月 2019 22:36

建議LZ起步先搞个洗澡盤和一把靠譜的6”手鉆。。。其它什马cordless drill, pop up tent, heater, Smitty Sled 都不是必要的。。。。一个白胶桶加个stock座垫,再加个中size cooler 放物,you are good to go, 其他的慢慢来吧
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#45  帖子Fishingdaddy » 27 11月 2019 22:37

Sergeantpepper @ 27 Nov 2019 21:26 写道:
Fishingdaddy @ Wed Nov 27, 2019 9:17 pm 写道: 看数据打冰洞996=991。996多个冲击钻功能。

你那新头像鵝研究了不少时间,应該不是PS出来的。。。就看摇晃的鉆身和雪上影子
有人去一試吗? :laugh3

我也觉得是真的,应该几多人试过。
找到本人了,现实很残酷 :roflmao

phpBB [video]
最后由 Fishingdaddy 编辑于 27 11月 2019 22:42,总共编辑了 1 次
Fishingdaddy
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2737
注册: 11 2月 2019 22:07
Member Number (论坛会员注册序列号): #2559

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#46  帖子Fishingdaddy » 27 11月 2019 22:39

Sergeantpepper @ 27 Nov 2019 21:36 写道: 建議LZ起步先搞个洗澡盤和一把靠譜的6”手鉆。。。其它什马cordless drill, pop up tent, heater, Smitty Sled 都不是必要的。。。。一个白胶桶加个stock座垫,再加个中size cooler 放物,you are good to go, 其他的慢慢来吧

Back to essentials :up
Fishingdaddy
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2737
注册: 11 2月 2019 22:07
Member Number (论坛会员注册序列号): #2559

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#47  帖子wetnose » 27 11月 2019 22:39

Sergeantpepper @ Wed Nov 27, 2019 9:26 pm 写道:
Fishingdaddy @ Wed Nov 27, 2019 9:17 pm 写道: 看数据打冰洞996=991。996多个冲击钻功能。

你那新头像鵝研究了不少时间,应該不是PS出来的。。。就看摇晃的鉆身和雪上影子
有人去一試吗? :laugh3

https://giphy.com/search/ICE-auger
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#48  帖子Sergeantpepper » 27 11月 2019 22:47

Fishingdaddy @ Wed Nov 27, 2019 9:37 pm 写道:
Sergeantpepper @ 27 Nov 2019 21:26 写道:
Fishingdaddy @ Wed Nov 27, 2019 9:17 pm 写道: 看数据打冰洞996=991。996多个冲击钻功能。

你那新头像鵝研究了不少时间,应該不是PS出来的。。。就看摇晃的鉆身和雪上影子
有人去一試吗? :laugh3

我也觉得是真的,应该几多人试过。
找到本人了,现实很残酷 :roflmao

VideoID: https://youtu.be/ED20knTBF7w


:laugh3 :roflmao :laugh3

就像那誰誰誰誰把propeller 牢牢握着,直升机机艙在儍转一样
最后由 Sergeantpepper 编辑于 27 11月 2019 22:55,总共编辑了 2 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#49  帖子Sergeantpepper » 27 11月 2019 22:48

那崩口插魚竿投魚獲两不誤
图片
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 大家帮我参谋一下,这套冰钓装备怎么样?

楼层:#50  帖子Sergeantpepper » 27 11月 2019 23:02

到华人超市搞一个胶的,清洞口冰碎用
图片
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

上一页下一页

回到 It's All About Fishin' 钓鱼!

在线用户